IFM PY2795 - Pressure sensor with display PI-005-REA01-MFRKG/US/ /P

Robust stainless steel housing for use in the food and beverage industry.
Hygienic, flush design.
Resistant to high-pressure cleaning with aggressive cleaning agents.
High temperature resistance and high protection rating.
Programmable analogue and switching output

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range	-1...5 bar -14.5...72.5 psi -100...500 kPa
Process connection	threaded connection G 1 external thread Aseptoflex Vario

Special feature	Gold-plated contacts
Application	flush mountable for the food and beverage industry
Media	viscous media and liquids with suspended particles; liquids and gases
Medium temperature [°C]	-25...125;(145 max. 1h)
Min. bursting pressure	100 bar 1450 psi 10000 kPa
Pressure rating	30 bar 435 psi 3000 kPa
Type of pressure	relative pressure
No dead space	yes

Min. insulation resistance [MΩ]	100;(500 V DC)
Protection class	III
Reverse polarity protection	yes
Integrated watchdog	yes

Operating voltage [V]	20...32 DC
Power-on delay time [s]	1

Operating voltage [V]	18...32 DC
Current consumption [mA]	< 45
Power-on delay time [s]	0.5

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; IO-Link;(configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed;(parameterisable)
Number of analogue outputs	1
Analogue current output [mA]	4...20, invertible; (scalable)
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Max. load [Ω]	300

Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	250
Switching frequency DC [Hz]	125
Max. load [Ω]	(Ub - 10 V) / 20 mA

Measuring/setting range

Measuring range	-1...5 bar -14.5...72.5 psi -100...500 kPa
Set point SP	-0.99...5 bar -14.35...72.5 psi -99...500 kPa
Reset point rP	-1...4.99 bar -14.5...72.35 psi -100...499 kPa
Analogue start point	-1...3.75 bar -14.5...54.5 psi -100...375 kPa
Analogue end point	0.25...5 bar 3.65...72.5 psi 25...500 kPa
In steps of	0.005 bar 0.05 psi 0.5 kPa
Factory setting	SP1 = 1.250 bar rP1 = 1.150bar SP2 = 3.750 bar rP2 = 3.650 bar ASP = 0.000 bar AEP = 5.000 bar

Accuracy / deviations

Switch point accuracy [% of the span]	< ± 0,2;(Turn down 1:1)
Repeatability [% of the span]	< ± 0,1;(with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation [% of the span]	< ± 0,2;(Turn down 1:1; linearity, incl. hysteresis and repeatability; limit value setting to DIN EN IEC 62828-1)
Linearity deviation [% of the span]	< ± 0,15;(Turn down 1:1)
Hysteresis deviation [% of the span]	< ± 0,15;(Turn down 1:1)
Long-term stability [% of the span]	< ± 0,1;(Turn down 1:1; per year)
Temperature coefficient zero point [% of the span / 10 K]	< ± 0,05;(0...70 °C)
Temperature coefficient span [% of the span / 10 K]	< ± 0,15;(0...70 °C)

Response times

Damping process value dAP [s]	0...30
Damping for the analogue output dAA [s]	0.01...99.99

Step response time analogue output [ms]	45

Min. response time of switching output (dAP) [ms]	3
Step response time analogue output [ms]	7

Interfaces

Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.0
Profiles	no profile
Process data analogue	1
Process data binary	2
Min. process cycle time [ms]	2.3

Operating conditions

Ambient temperature [°C]	-25...80
Storage temperature [°C]	-40...100
Protection	IP 67; IP 68; IP 69K

Tests / approvals

EMC	DIN EN 61000-6-2 DIN EN 61000-6-3
Shock resistance	DIN IEC 68-2-27 50 g (11 ms)
Vibration resistance	DIN IEC 68-2-6 20 g (10...2000 Hz)
MTTF [years]	148.66

Weight [g]	297.5
Materials	stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA
Materials (wetted parts)	ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE
Min. pressure cycles	100 million
Tightening torque [Nm]	35;(recommended tightening torque; depends on lubrication, seal and pressure rating)
Process connection	threaded connection G 1 external thread Aseptoflex Vario

Displays / operating elements

Display	Display unit LED, green switching status LED, yellow function display alphanumeric display, 4-digit measured values alphanumeric display, 4-digit
Display unit	bar; psi; kPa; % of the span

Pack quantity	1 pcs.

Electrical connection

	Connector: 1 x M12; coding: A; Contacts: gold-plated

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PY2795-00 — 13.04.2023 —