1 1

Schmersal

Schmersal AZ201CC-T-1P2P Sicherheitsschalter mit Betätiger, sku: 103015814

Schmersal AZ201CC-T-1P2P Sicherheitsschalter mit Betätiger, sku: 103015814

€534,63
€534,63
Sale Sold out
Taxes included.

📦 Ready for dispatch: 30.11.2025

SKU: 103015814

  • Kunststoffgehäuse
  • Bedarfsgerechter Manipulationsschutz durch RFID-Technologie
  • max. Länge der Sensorkette 200 m
  • selbstüberwachte Reihenschaltung
  • 3 LEDs zur Anzeige der Betriebszustände
  • Sensor-Technik erlaubt Versatz von Betätiger und Zuhaltung von vertikal ± 5 mm und horizontal ± 3 mm
  • für Dreh- und Schiebetüren geeignet
  • Intelligente Diagnose
  • Product type description: AZ201CC-T-1P2P
  • Article number (order number): 103015814
  • EAN (European Article Number): 4030661504285
  • eCl@ss number, version 12.0: 27-27-26-02
  • eCl@ss number, version 11.0: 27-27-26-02
  • eCl@ss number, version 9.0: 27-27-26-02
  • ETIM number, version 7.0: EC002592
  • ETIM number, version 6.0: EC002592
  • Certificates: TÜV, cULus, FCC, IC, UKCA, ANATEL
  • Standards: EN ISO 13849-1, EN ISO 14119, EN IEC 60947-5-3, EN IEC 61508
  • Coding: Universal coding
  • Coding level according to EN ISO 14119: Low
  • Working principle: RFID, 125 kHz
  • Transmitter output RFID, maximum: -6 dB/m
  • Housing material: Glass-fibre, reinforced thermoplastic
  • Duration of risk, maximum: 200 ms
  • Reaction time, switching off safety outputs via actuator, maximum: 100 ms
  • Reaction time, switching off safety outputs via safety inputs, maximum: 0.5 ms
  • Gross weight: 392 g
  • Short circuit detection: Yes
  • Cross-circuit detection: Yes
  • Series-wiring: Yes
  • Safety functions: Yes
  • Integral system diagnostics, status: Yes
  • Number of safety contacts: 2
  • Safety classification
  • Standards: EN ISO 13849-1, EN IEC 61508
  • Performance Level, up to: e
  • Category: 4
  • PFH value: 1.90 x 10⁻⁹ /h
  • PFD value: 1.60 x 10⁻⁴
  • Safety Integrity Level (SIL), suitable for applications in: 3
  • Mission time: 20 Year(s)
  • Mechanical life, minimum: 1,000,000 Operations
  • Latching force: 30 N
  • Actuating speed, maximum: 0.2 m/s
  • Type of the fixing screws: 2x M6
  • Tightening torque of the fastening screws for the housing cover, minimum: 0.7 Nm
  • Tightening torque of the fastening screws for the housing cover, maximum: 1 Nm
  • Note: Torx T10
  • Assured switching distance "ON" Sao: 4 mm
  • Assured switching distance "OFF" Sar: 30 mm
  • Hysteresis (Switching distance), maximum: 1.5 mm
  • Repeat accuracy R: 0.5 mm
  • Length of sensor chain, maximum: 200 m
  • Note (length of the sensor chain): Cable length and cross-section change the voltage drop dependiing on the output current
  • Note (series-wiring): Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
  • Termination: Spring pulley connection
  • Cable section, minimum: 0.25 mm²
  • Cable section, maximum: 1.5 mm²
  • Note: All indications including the conductor ferrules.
  • Wire cross-section, minimum: 23 AWG
  • Wire cross-section, maximum: 15 AWG
  • Wire cross-section: 23 ... 15 AWG
  • Allowed type of cable: solid single-wire, solid multi-wire, flexible
  • Length of sensor: 50 mm
  • Width of sensor: 40 mm
  • Height of sensor: 220 mm
  • Degree of protection: IP66, IP67
  • Ambient temperature: -25 ... +70 °C
  • Storage and transport temperature: -25 ... +85 °C
  • Relative humidity, maximum: 93 %
  • Note (Relative humidity): non-condensing, non-icing
  • Resistance to vibrations: 10 … 150 Hz, amplitude 0.35 mm
  • Restistance to shock: 30 g / 11 ms
  • Protection class: III
  • Permissible installation altitude above sea level, maximum: 2,000 m
  • Rated insulation voltage Ui: 32 VDC
  • Rated impulse withstand voltage Uimp: 0.8 kV
  • Overvoltage category: III
  • Degree of pollution: 3
  • Operating voltage: 24 VDC -15 % / +10 %
  • No-load supply current I0, typical: 50 mA
  • Rated operating voltage: 24 VDC
  • Operating current: 700 mA
  • Required rated short-circuit current: 100 A
  • External wire and device fuse rating: 4A gG
  • Time to readiness, maximum: 4,000 ms
  • Switching frequency, maximum: 1 Hz
  • Designation, Safety inputs: X1 and X2
  • Switching thresholds: −3 V … 5 V (Low), 15 V … 30 V (High)
  • Current consumption at 24 V: 5 mA
  • Test pulse duration, maximum: 1 ms
  • Test pulse interval, minimum: 100 ms
  • Classification ZVEI CB24I, Sink: C1
  • Classification ZVEI CB24I, Source: C1, C2, C3
  • Designation, Safety outputs: Y1 and Y2
  • Rated operating current (safety outputs): 250 mA
  • Design of control elements: short-circuit proof, p-type
  • Voltage drop Ud, maximum: 4 V
  • Leakage current Ir, maximum: 0.5 mA
  • Voltage, Utilisation category DC-13: 24 VDC
  • Current, Utilisation category DC-13: 0.25 A
  • Test pulse interval, typical: 1000 ms
  • Test pulse duration, maximum: 0.5 ms
  • Classification ZVEI CB24I, Source: C2
  • Classification ZVEI CB24I, Sink: C1, C2
  • Designation, Diagnostic outputs: OUT
  • Operating current: 50 mA
  • Design of control elements: short-circuit proof, p-type
  • Voltage drop Ud, maximum: 4 V
  • Voltage, Utilisation category DC-13: 24 VDC
  • Current, Utilisation category DC-13: 0.05 A
  • Note (LED switching conditions display): Operating condition: LED green, Error / functional defect: LED red, Supply voltage UB: LED green
  • Scope of delivery: Actuator must be ordered separately.
  • Recommendation (actuator): AZ/AZM201-B1, AZ/AZM201-B30
View full details