1 1

Schmersal

Schmersal AZM40Z-I1-ST-1P2P Sicherheitszuhaltungen, sku: 103034188

Schmersal AZM40Z-I1-ST-1P2P Sicherheitszuhaltungen, sku: 103034188

€616,02
€616,02
Sale Sold out
Taxes included.

📦 Ready for dispatch: 19.12.2025

SKU: 103034188

  • Kleine, flache Bauform
  • 119,5 mm x 40 mm x 20 mm
  • hohe Zuhaltekraft 2000 N
  • Rastkraft 40 N
  • Bedarfsgerechter Manipulationsschutz durch RFID-Technologie
  • Individuell codierte Varianten mit Codierstufe hoch gemäß ISO 14119
  • Nur eine Ausführung für Dreh- und Schiebetüren
  • Betätiger kann Zuhaltung stufenlos innerhalb eines 180° Winkels anfahren.
  • Symmetrischer Anbau, beidseitig anschraubbar
  • Product type description: AZM40Z-I1-ST-1P2P
  • Article number (order number): 103034188
  • EAN (European Article Number): 4030661535135
  • eCl@ss number, version 12.0: 27-27-26-03
  • eCl@ss number, version 11.0: 27-27-26-03
  • eCl@ss number, version 9.0: 27-27-26-03
  • ETIM number, version 7.0: EC002593
  • ETIM number, version 6.0: EC002593
  • Certificates: TÜV, cULus, FCC, IC
  • Standards: EN ISO 13849-1, EN ISO 14119, EN IEC 60947-5-3, EN IEC 61508
  • Coding: Individual coding
  • Coding level according to EN ISO 14119: High
  • Working principle: RFID
  • Frequency band RFID: 125 kHz
  • Transmitter output RFID, maximum: -6 dB/m
  • Enclosure material: Light alloy die cast and plastic (glass-fibre reinforced thermoplastic, self-extinguishing)
  • Gross weight: 270 g
  • Reaction time, maximum: 100 ms
  • Duration of risk, maximum: 200 ms
  • Reaction time, switching off safety outputs via safety inputs, maximum: 1.5 ms
  • Solenoid interlock monitored: Yes
  • Latching: Yes
  • Manual release: Yes
  • Short circuit detection: Yes
  • Cross-circuit detection: Yes
  • Series-wiring: Yes
  • Safety functions: Yes
  • Integral system diagnostics, status: Yes
  • Number of safety contacts: 2
  • Safety classification: 2
  • Standards: EN ISO 13849-1, EN IEC 61508
  • Performance Level, up to: e
  • Category: 4
  • PFH value: 1.10 x 10⁻⁹ /h
  • PFD value: 8.90 x 10⁻⁵
  • Safety Integrity Level (SIL), suitable for applications in: 3
  • Mission time: 20 Year(s)
  • Performance Level, up to: d
  • Category: 2
  • PFH value: 3.00 x 10⁻⁹ /h
  • PFD value: 2.40 x 10⁻⁴
  • Safety Integrity Level (SIL), suitable for applications in: 2
  • Mission time: 20 Year(s)
  • Interlocking principle: bistable
  • Mechanical life, locking cycles: 1,000,000 Operations
  • Mechanical life, actuator cycles: 200,000 Operations
  • Holding force FZh in accordance with EN ISO 14119: 2,000 N
  • Holding force Fmax, maximum: 2,600 N
  • Latching force: 40 N
  • Note (Latch force): +/- 25%
  • Actuating speed, maximum: 0.5 m/s
  • Mounting: mounting holes countersink
  • Type of the fixing screws: 2x M5
  • Tightening torque of the fixing screws, minimum: 4 Nm
  • Assured switching distance "ON" Sao: 1 mm
  • Assured switching distance "OFF" Sar: 8 mm
  • Termination: Connector M12, 8-pole, A-coded
  • Length of sensor chain, maximum: 30 m
  • Note (length of the sensor chain): Cable length and cross-section change the voltage drop dependiing on the output current
  • Note (series-wiring): Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
  • Length of sensor: 119.5 mm
  • Width of sensor: 40 mm
  • Height of sensor: 20 mm
  • Degree of protection: IP67, IP66
  • Ambient temperature: +0 ... +55 °C
  • Storage and transport temperature, minimum: -40 °C
  • Storage and transport temperature, maximum: +85 °C
  • Relative humidity, maximum: 93 %
  • Note (Relative humidity): non-condensing, non-icing
  • Resistance to vibrations: 10 … 55 Hz, amplitude 1 mm
  • Restistance to shock: 30 g / 11 ms
  • Protection class: III
  • Permissible installation altitude above sea level, maximum: 2,000 m
  • Rated insulation voltage Ui: 32 VDC
  • Rated impulse withstand voltage Uimp: 0.8 kV
  • Overvoltage category: III
  • Degree of pollution: 3
  • Operating voltage: 24 VDC -15 % / +10 % (stabilised PELV power supply)
  • No-load supply current I0, maximum: 100 mA
  • Rated operating voltage: 24 VDC
  • Operating current: 1,200 mA
  • Required rated short-circuit current: 100 A
  • External wire and device fuse rating: 2 A gG
  • Time to readiness, maximum: 4,000 ms
  • Switching frequency, maximum: 0.25 Hz
  • Current consumption magnet at switching moment, peak: 600 mA / 100ms
  • Designation, Magnet control: IN
  • Switching thresholds: -3 V … 5 V (Low), 15 V … 30 V (High)
  • Magnet switch-on time: 100 %
  • Test pulse duration, maximum: 5 ms
  • Test pulse interval, minimum: 40 ms
  • Classification ZVEI CB24I, Sink: C0
  • Classification ZVEI CB24I, Source: C1, C2, C3
  • Current consumption at 24V, minimum: 10 mA
  • Current consumption at 24V, maximum: 15 mA
  • Designation, Safety inputs: X1 and X2
  • Switching thresholds: −3 V … 5 V (Low), 15 V … 30 V (High)
  • Current consumption at 24 V: 5 mA
  • Test pulse duration, maximum: 1 ms
  • Test pulse interval, minimum: 100 ms
  • Classification ZVEI CB24I, Sink: C1
  • Classification ZVEI CB24I, Source: C1, C2, C3
  • Designation, Safety outputs: Y1 and Y2
  • Rated operating current (safety outputs): 250 mA
  • Design of control elements: short-circuit proof, p-type
  • Voltage drop Ud, maximum: 2 V
  • Leakage current Ir, maximum: 0.5 mA
  • Voltage, Utilisation category DC-12: 24 VDC
  • Current, Utilisation category DC-12: 0.25 A
  • Voltage, Utilisation category DC-13: 24 VDC
  • Current, Utilisation category DC-13: 0.25 A
  • Test pulse interval, typical: 1000 ms
  • Test pulse duration, maximum: 0.5 ms
  • Classification ZVEI CB24I, Source: C2
  • Classification ZVEI CB24I, Sink: C1, C2
  • Designation, Diagnostic outputs: OUT
  • Design of control elements: short-circuit proof, p-type
  • Voltage drop Ud, maximum: 2 V
  • Voltage, Utilisation category DC-12: 24 VDC
  • Current, Utilisation category DC-12: 0.05 A
  • Voltage, Utilisation category DC-13: 24 VDC
  • Current, Utilisation category DC-13: 0.05 A
  • Note (LED switching conditions display): Operating condition: LED green, Error / functional defect: LED red, Supply voltage UB: LED green
  • PIN 1: A1 Supply voltage UB
  • PIN 2: X1 Safety input 1
  • PIN 3: A2 GND
  • PIN 4: Y1 Safety output 1
  • PIN 5: OUT Diagnostic output
  • PIN 6: X2 Safety input 2
  • PIN 7: Y2 Safety output 2
  • PIN 8: IN Solenoid control
  • Recommendation (actuator): AZM40-B1
View full details