Wenglor

Wenglor CP25QXVT80, Laser Distance Sensor Triangulation

Wenglor CP25QXVT80, Laser Distance Sensor Triangulation

Regular price €675,92
Regular price Sale price €675,92
Sale Sold out
Taxes included.

📦 Ready for dispatch: 03.12.2025

SKU: SKU:CP25QXVT80

These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness.

Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments.

Sensor functions can be activated and values can be output via the RS-232 interface.

  • Minimal switching hysteresis
  • Switching point independent of material, color and brightness
  • CMOS line array
  • Highly accurate switching distance
Optical Data
Range 240 mm
Setting Range 40 ... 240 mm
Switching Hysteresis < 0.5 %
Light Source Laser (red)
Wavelength 655 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 2
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1
Electrical Data
Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 500 Hz
Response Time 1 ms
On-/Off-Delay (RS-232) 0 ... 1 s
Temperature Drift < 15 µm/K
Temperature Range -25 ... 60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 1.5 V
Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Teach Mode HT, VT, TP
Transmission rate 38,400 Bd
Protection Class III
FDA Accession Number 0820586-000
Mechanical Data
Setting Method Teach-In
Housing Material Plastic, ABSPlastic, PC
Degree of Protection IP67
Connection M12 × 1; 8-pin
Optic Cover Plastic, PMMA
Weight 76 g
Output
Error Output yes
PNP NO yes
RS-232 Interface yes
Adjustable parameters
Output Push-pullNPNPNPError Output
Other parameters Off-delayOn-delayExposure timeTeach modeSwitching hysteresisLaser light
All other parameters can be found in the product documentation.
Standards and certificates
Table 1
Detection Range 40 mm 240 mm
Spot Size 0,6 × 2,5 mm 1 × 4 mm
Connection Diagram
Ctrl. Panel
24 = Plus Button25 = Minus Button07 = Selector Switch03 = Error Indicator01 = Switching Status Indicator
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Transmitter Diode2 = Receiver DiodeScrew M4 = 0.5 Nm
Complementary Products
  • Interface Cable S232W3
  • Protective Housing ZSV-0x-01
  • Set Protective Housing ZSP-NN-02
  • Software
View full details