1
/
of
0
Wenglor
Wenglor CP70QXVT80S806, Laser Distance Sensor Triangulation
Wenglor CP70QXVT80S806, Laser Distance Sensor Triangulation
Regular price
€982,15
Regular price
Sale price
€982,15
Unit price
/
per
Taxes included.
📦 Ready for dispatch: 03.12.2025
Couldn't load pickup availability
SKU: SKU:CP70QXVT80S806
These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness.
Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments.
Sensor functions can be activated and values can be output via the RS-232 interface.
- CMOS line array
- Highly accurate switching distance
- Minimal switching hysteresis
- Switching point independent of material, color and brightness
| Optical Data | |
|---|---|
| Range | 800 mm |
| Setting Range | 60 ... 800 mm |
| Switching Hysteresis | < 1 % |
| Light Source | Laser (red) |
| Wavelength | 655 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 2 |
| Max. Ambient Light | 10,000 Lux |
| Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 50 mA |
| Switching Frequency | 150 Hz |
| Response Time | 3,300 µs |
| On-/Off-Delay (RS-232) | 0 ... 1 s |
| Temperature Drift | < 80 µm/K |
| Temperature Range | -25 ... 60 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 1.5 V |
| Switching Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Teach Mode | HT, VT, TP |
| Interface | RS-232 |
| Transmission rate | 38,400 Bd |
| Protection Class | III |
| Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Plastic, ABSPlastic, PC |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 8-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 45 g |
| Output | |
|---|---|
| Error Output | yes |
| Configurable as PNP/NPN/Push-Pull | yes |
| Switchable to NC/NO | yes |
| RS-232 Interface | yes |
| Adjustable parameters | |
|---|---|
| Output | Error OutputPush-pullNPNPNP |
| Other parameters | Off-delayOn-delayExposure timeLaser lightSwitching hysteresisTeach-in mode |
| All other parameters can be found in the product documentation. |
| Standards and certificates |
|---|
| Table 1 | ||
|---|---|---|
| Detection Range | 60 mm | 800 mm |
| Spot Size | 0,6 × 2,5 mm | 4 × 10 mm |
| Connection Diagram |
|---|
| Ctrl. Panel |
|---|
| 07 = Selector Switch24 = Plus Button25 = Minus Button03 = Error Indicator01 = Switching Status Indicator |
| Dimensioned Picture |
|---|
| Dimensions specified in mm (1 mm = 0.03937")1 = Transmitter Diode2 = Receiver DiodeScrew M4 = 0.5 Nm |
| Complementary Products |
|---|
|