Wenglor E1FL66VD, Through-Beam Sensor

These through-beam sensors are best suited for use in industrial environments. Thanks to their large working range, the devices demonstrate excellent functional reliability in highly contaminated environments. The sensors can be checked for correct functioning via the test input.

• Integrated output
• Recognition of small parts
• Rear panel mounting

Optical Data
Range	1,000 mm
Switching Hysteresis	< 15 %
Light Source	Infrared Light
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux
Opening Angle	30 °

Electrical Data
Sensor Type	Receiver
Supply Voltage	10 ... 30 V DC
Current Consumption (Ub = 24 V)	< 30 mA
Switching Frequency	500 Hz
Response Time	1 ms
Temperature Drift	< 10 %
Temperature Range	-25 ... 60 °C
Switching Output Voltage Drop	< 2.5 V
Switching Output/Switching Current	100 mA
Residual Current Switching Output	< 50 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Protection Class	III

Mechanical Data
Housing Material	Plastic, ABS/GF
Degree of Protection	IP67
Connection	Cable; 3-wire
Cable length (L)	2 m
Cable Jacket Material	PVC
Wire cross-section	0.09 mm²
Weight	21 g

Safety-relevant Data
MTTFd (EN ISO 13849-1)	5,592.92 a

Output
PNP NC	yes

Standards and certificates

* Temperature range with permanently installed cable, bending radius: > 40 mm

Connection Diagram

Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Emitter / ReceiverScrew M2 = 0,3 Nm