1 0

    Wenglor

    Wenglor FFAF087, Flow Sensor

    Wenglor FFAF087, Flow Sensor

    €712,41
    €712,41
    Sale Sold out
    Taxes included.

    📦 Ready for dispatch: 31.12.2025

    SKU: FFAF087

    wenglor UniFlow flow sensors measure the flow rate of aqueous and oily media in closed piping systems.

    UniFlow flow sensors are very easy to operate thanks to the integrated display. The highly visible switching status display enables the rapid localization of affected sensors for maintenance processes.

    • Simple operation via the display
    • Measurement independent of flow direction
    • Installation in any position
    • Highest precision of its class
    • Display can be switched between flow and medium temperature
    • Temperature of the medium: 0 ... 60° C (140° C for 24 hours without current measurement)
    Sensor-specific data
    Measuring Range 15 ... 100 cm/s
    Setting Range 20 ... 100 cm/s
    Medium Oil
    Measuring error (total) 2 %
    MTTFd (EN ISO 13849-1) 1,194.55 a
    Switching Hysteresis 5 %
    Temperature gradient 30 K
    Response time in case of temperature jump 10 s
    Environmental conditions
    Temperature of medium 0 ... 60 °C
    Ambient temperature -20 ... 70 °C
    Pressure Resistance 60 bar
    EMC DIN EN 60947-5-9
    Shock resistance per DIN IEC 68-2-27 30 g / 11 ms
    Vibration resistance per DIN IEC 60068-2-6 20 g (10...2000 Hz)
    Electrical Data
    Supply Voltage 16 ... 32 V DC
    Current Consumption (Ub = 24 V) 60 mA
    Number of Switching Outputs 1
    Analog Output 4...20 mA
    Signal source Flow
    Response Time 4 ... 15 s
    Switching Output/Switching Current < 250 mA
    Switching Output Voltage Drop < 2 V
    Current Output Load Resistance < 500 Ohm
    Short Circuit Protection yes
    Reverse Polarity Protection yes
    Protection Class III
    Mechanical Data
    Setting Method Menu
    Housing Material Plastic, PBTPlastic, PC
    Material Control Panel Polyester
    Material in contact with media Stainless steel, V4A (1.4404 / 316L)Stainless steel, V4A (1.4435/316L)Rubber, FKM
    Degree of Protection IP67 *
    Connection M12 × 1; 4-pin
    Process Connection Sealing cone M18 × 1,5
    Process Connection Length (PCL) 64 mm
    Probe Length (PL) 44 mm
    Weight 288 g
    Output
    Analog output flow yes
    PNP NO yes
    Adjustable parameters
    Circuit NCNC/NONO
    Other parameters Selectable measurement rangeSwitching point
    All other parameters can be found in the product documentation.
    Standards and certificates
    * Certified by wenglor
    Connection Diagram
    Ctrl. Panel
    01 = Switching Status Indicator60 = display20 = Enter key22 = Up key99 = Right button
    Dimensioned Picture
    Dimensions specified in mm (1 mm = 0.03937")Wrench Size
    Complementary Products
    • IO-Link converter
    • Software
    View full details