Wenglor

Wenglor FX5Q101, Pressure Sensor 2 × Analog Output

Wenglor FX5Q101, Pressure Sensor 2 × Analog Output

Regular price €528,36
Regular price Sale price €528,36
Sale Sold out
Taxes included.

📦 Ready for dispatch: 06.11.2025

SKU: SKU:FX5Q101

weFlux2 pressure sensors measure the relative pressure of any desired media in closed systems. The pressure acting upon the sensor is converted to an electronic signal. The analog outputs read out the measured pressure and temperature values as 4 to 20 mA signals.

  • Pressure and temperature measurement with a single sensor
  • Compact, laser-welded stainless steel 316L housing
  • 2 analog outputs: 4 ... 20 mA
  • Temperature-compensated pressure measurement
Sensor-specific data
Measuring Range -1 ... 10 bar
Measurement Type relative
Maximum overload pressure 20 bar
Bursting pressure 30 bar
Medium Liquids, gases
Temperature Measurement Range -40 ... 125 °C
Response time (t90) Temp < 1 s
Pressure response time (t90) < 10 ms
Temperature Measurement Accuracy < ± 1 °C
Measuring error (total) ± 0.5 %
Hysteresis < ± 0.1 %
Linearity Deviation < ± 0.5 %
Zero-point error < ± 0.1 %
Repeat Accuracy < ± 0.1 %
Temperature coefficient zero-point <± 0,05% /10K
Temperature coefficient range <± 0,05% /10K
Environmental conditions
Temperature of medium -40 ... 125 °C**
Ambient temperature -25 ... 80 °C
Storage temperature -25 ... 80 °C
EMC DIN EN 61326-2-3
Shock resistance per DIN IEC 68-2-27 50 g / 11 ms
Vibration resistance per DIN IEC 60068-2-6 10 g (10...2000 Hz)
Electrical Data
Supply Voltage 12 ... 32 V DC
Current Consumption (Ub = 24 V) < 15 mA
Number of analog outputs 2
Analog Output 4...20 mA
Signal source PressureTemperature
Resolution > 11 bit
Current Output Load Resistance < 500 Ohm
Short Circuit Protection yes
Reverse Polarity Protection yes
Protection Class III
Mechanical Data
Sensor element Ceramic membrane
Housing Material Stainless steel, V4A (1.4404/316L)
Material in contact with media Stainless steel, V4A (1.4404 / 316L)Rubber, FKMCeramic
Degree of Protection IP65 *
Connection M12 × 1; 4-pin
Process Connection G3/4"; front
Seal material Fluororubber, FKM
Weight 196 g
Safety-relevant Data
MTTFd (EN ISO 13849-1) 1,157.11 a
Output
Analog Output yes
Standards and certificates
* Not UL certified** Sensors up to 125 °C medium temperature suitable. During installation, please ensure that the sensor housing is sufficiently cooled by the surroundings.
Connection Diagram
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")Wrench Size
Complementary Products
  • IO-Link converter
View full details