The inductive high-temperature sensors are designed for use in very hot work environments and consist of an analysis module with cable and a separate sensor head. Long switching distances and a long service life in hot areas ensure maximum system reliability. Sensor heads can be replaced without the use of tools, and numerous standard cable lengths with integrated analysis module are available separately. weproTec technology makes it possible to install the sensors directly next to or opposite one another. In addition, IO-Link can be used to individually configure sensor parameters such as switching distances and output functions.
Three configurable switching distances: 30/35/40 mm
Easy to replace sensors with data storage feature
Cable with analysis module integrated into M12 sensor connector
Cable lengths of 5 to 20 m
Inductive Data
Switching Distance
40 mm
Compatible with
INTT320
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 15 mA
Switching Frequency
50 Hz
Temperature Drift
< 10 %
Temperature range of the plug
0 ... 70 °C
Number of Switching Outputs
2
Switching Output Voltage Drop
< 1 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 100 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Analysis module material
Brass, nickel-plated
Degree of protection, sensor head
IP50
Degree of protection of the plug
IP50
Connection
M12 × 1; 4-pin
Cable length (L)
10 m
Cable Jacket Material
Plastic, PFA
Outer diameter cable
3.4 mm
Bending Radius
> 17 mm
PWIS-free
yes
Weight
621 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
3,706.54 a
Function
Error Indicator
yes
Programmable switching distance
30/35/40 mm
Output
IO-Link
yes
Error Output
yes
PNP NO
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NCNC/NONO
Standards and certificates
Connection Diagram
Ctrl. Panel
01 = Switching Status Indicator
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Switching Status Indicator2 = Push-Pull connector
