The LFD series flat dome lights are high-diffuse lights with a camera connection. Due to their intense luminous flux and high homogeneity, they are perfectly suited for large-area applications such as robot-assisted pick-and-place. They can be used in continuous mode or synchronized with the machine vision camera in strobe mode via PNP or NPN inputs. The light is characterized by its narrow edges (4 mm) and easy mounting thanks to the T-slot fastener and the anchor point around the housing. Cameras can be connected easily on the rear of the light.
High homogeneity
No external control required
High performance: high intensity even in continuous mode
Easy and flexible installation
Optical Data
Light Source
Infrared Light
Wavelength
850 nm
Risk Group (EN 62471)
1
Infrared light output
119 W/m²
Electrical Data
Supply Voltage
21.6 ... 26.4 V DC
Power
110.16 W
Current Consumption Continuous Mode (Ub = 24 V)
4.59 A
Rise time
15 µs
Fall time
10 µs
Input signal
PNP/NPN
Temperature Range
-10 ... 40 °C
Storage temperature
-20 ... 60 °C
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Protection Class
III
Dimming
0....10 V ≙ 100...30%
Overdrive
no
Mechanical Data
Luminous Field Length (L)
400 mm
Luminous Field Width (W)
400 mm
Luminous Field
400 × 400 mm
Housing Material
Aluminum, anodisedPlastic, ABS/GF
Degree of Protection
IP50
UL Enclosure Type
1
Optic Cover
Plastic, PMMA
Connection
M12 × 1; 5-pin
Max. cable lenght
10 m
Camera aperture inner diameter
65 mm
Weight
3,808 g
Function
Operating modes
Continuous, Strobe
Standards and certificates
Illumination methods
Connection Diagram
Ctrl. Panel
68 = Power LED9b = Strobe Mode Indicator
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Guide slot/slot nut2 = Luminous field
