wenglor dome lights from the LMDXxx3 series are ideal for homogeneous illumination of glossy parts, demanding surfaces and fluorescent materials. The multi-UV dome light allows users to test multiple wavelengths (UV365, UV395, UV405 and white light) and select the most effective option. Operator safety is maximized by blocking direct UV radiation through the dome and an integrated filter. The dome light can be operated in continuous mode (white light only) or synchronized in strobe mode (UV and white light).
All-in-one UV solution
Homogeneous dome effect
Integrated controller for easy setup
Powerful flash mode
Optical Data
Light Source
UV white light
Wavelength spectrum
365 nm, 395 nm, 405 nm, white light
Environmental conditions
Temperature Range
-10 ... 40 °C
Storage temperature
-20 ... 60 °C
Atmospheric humidity
< 80%, non-condensing
Electrical Data
Supply Voltage
21.6 ... 26.4 V DC
Power
2.3 W
Peak power
23 W
Current Consumption Continuous Mode (Ub = 24 V)
0.38 A
Current consumption flash mode overdrive (operating voltage = 24 V)
0.96 A
Flash duration (max.)
10 ms
Duty cycle (max.)
< 0,1
Rise time
15 µs
Fall time
10 µs
Input signal
NPN
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Protection Class
III
Dimming
0....10 V ≙ 100...40%
Mechanical Data
Housing Material
Aluminum, anodisedPlastic, ABSPlastic, PMMAGlass
Degree of Protection
IP65
UL Enclosure Type
1
Connection
M12 × 1; 5-pin
Max. cable lenght
5 m
Camera aperture inner diameter
130 mm
Weight
750 g
Function
Operating modes
Continuous, Strobe
Standards and certificates
Illumination methods
Connection Diagram
Ctrl. Panel
68 = Power LED9b = Strobe Mode Indicator9c = Color selection display
