1
/
of
0
Wenglor
Wenglor OCP662X0080, Laser Distance Sensor Triangulation
Wenglor OCP662X0080, Laser Distance Sensor Triangulation
Regular price
€674,33
Regular price
Sale price
€674,33
Unit price
/
per
Taxes included.
📦 Ready for dispatch: 03.12.2025
Couldn't load pickup availability
SKU: SKU:OCP662X0080
These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness.
Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments.
Sensor functions can be activated and values can be output via the RS-232 interface.
- CMOS line array
- Highly accurate switching distance
- Minimal switching hysteresis
- Special coated optics
| Optical Data | |
|---|---|
| Range | 660 mm |
| Setting Range | 60 ... 660 mm |
| Switching Hysteresis | < 1 % |
| Light Source | Laser (red) |
| Wavelength | 655 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see Table 1 |
| Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 50 mA |
| Switching Frequency | 100 Hz |
| Response Time | < 5 ms |
| On-/Off-Delay (RS-232) | 0 ... 1 s |
| Temperature Drift | < 50 µm/K |
| Temperature Range | -25 ... 60 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 1.5 V |
| Switching Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Teach Mode | HT, VT, TP |
| Transmission rate | 38,400 Bd |
| Protection Class | III |
| FDA Accession Number | 1120728-000 |
| Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Plastic, ABSPlastic, PC |
| Coated Optics | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 8-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 74 g |
| Output | |
|---|---|
| Error Output | yes |
| PNP NO | yes |
| RS-232 Interface | yes |
| Adjustable parameters | |
|---|---|
| Output | Error OutputPush-pullNPNPNP |
| Circuit | NCNC/NONO |
| Other parameters | Off-delayOn-delayExposure timeSwitching hysteresisEmitted lightTeach-in mode |
| All other parameters can be found in the product documentation. |
| Standards and certificates |
|---|
| Table 1 | ||
|---|---|---|
| Detection Range | 60 mm | 660 mm |
| Spot Size | 0,5 × 1,2 mm | 2 × 5,5 mm |
| Connection Diagram |
|---|
| Ctrl. Panel |
|---|
| 07 = Selector Switch24 = Plus Button25 = Minus Button03 = Error Indicator01 = Switching Status Indicator |
| Dimensioned Picture |
|---|
| Dimensions specified in mm (1 mm = 0.03937")1 = Transmitter Diode2 = Receiver DiodeScrew M4 = 0.5 Nm |
| Complementary Products |
|---|
|