1 0

    Wenglor

    Wenglor OCP662X0135, Laser Distance Sensor Triangulation

    Wenglor OCP662X0135, Laser Distance Sensor Triangulation

    €714,00
    €714,00
    Sale Sold out
    Taxes included.

    📦 Ready for dispatch: 03.12.2025

    SKU: OCP662X0135

    These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness.

    Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments.

    Sensor functions can be activated and values can be output via the RS-232 interface.

    • CMOS line array
    • Highly accurate switching distance
    • Minimal switching hysteresis
    • Switching point independent of material, color and brightness
    Optical Data
    Range 660 mm
    Setting Range 60 ... 660 mm
    Switching Hysteresis < 1 %
    Light Source Laser (red)
    Wavelength 655 nm
    Service Life (T = +25 °C) 100,000 h
    Laser Class (EN 60825-1) 1
    Max. Ambient Light 10,000 Lux
    Light Spot Diameter see Table 1
    Electrical Data
    Supply Voltage 10 ... 30 V DC
    Current Consumption (Ub = 24 V) < 50 mA
    Switching Frequency 100 Hz
    Response Time < 5 ms
    On-/Off-Delay (RS-232) 0 ... 1 s
    Temperature Drift < 50 µm/K
    Temperature Range -25 ... 60 °C
    Number of Switching Outputs 2
    Switching Output Voltage Drop < 1.5 V
    Switching Output/Switching Current 200 mA
    Short Circuit Protection yes
    Reverse Polarity Protection yes
    Teach Mode HT, VT, FT, TP
    Transmission rate 9,600 Bd
    Protection Class III
    FDA Accession Number 1120728-000
    Mechanical Data
    Setting Method Teach-In
    Housing Material Plastic, ABSPlastic, PC
    Degree of Protection IP67
    Connection M12 × 1; 4-pin
    Optic Cover Plastic, PMMA
    Weight 43 g
    Safety-relevant Data
    MTTFd (EN ISO 13849-1) 918.59 a
    Output
    Error Output yes
    PNP NO yes
    RS-232 with Adapterbox yes
    External teach-in input yes
    Adjustable parameters
    Output Error OutputPush-pullNPNPNP
    Circuit NCNC/NONO
    Other parameters Exposure timeLaser lightSwitching hysteresisTeach-in modeOff-delayOn-delay
    All other parameters can be found in the product documentation.
    Standards and certificates
    Table 1
    Detection Range 60 mm 660 mm
    Spot Size 0,5 x 1,2 mm 2 x 5,5 mm
    Connection Diagram
    Ctrl. Panel
    07 = Selector Switch24 = Plus Button25 = Minus Button03 = Error Indicator01 = Switching Status Indicator
    Dimensioned Picture
    Dimensions specified in mm (1 mm = 0.03937")1 = Transmitter Diode2 = Receiver DiodeScrew M4 = 0.5 Nm
    Complementary Products
    • Protective Housing ZSV-0x-01
    • Adapterbox A232
    • Set Protective Housing ZSP-NN-02
    • Software
    View full details