These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object.
Sensors with Industrial Ethernet make the analog and digital input cards at control units unnecessary, as all service and measurement data is read, analyzed and processed in the control unit in real time, without the need for conversion. Power over Ethernet connects data transfer and power supply in one cable and thus reduces the wiring effort.
Secure detection of black objects also in extremely inclined positions with wintec
Industrial Ethernet
Reliable in case of glossy objects with wintec
Web server and graphic display for simple operation
Optical Data
Working Range
0.1 ... 10.1 m
Reproducibility maximum
7 mm
Linearity Deviation
20 mm
Light Source
Laser (red)
Wavelength
660 nm
Service Life (T = +25 °C)
100,000 h
Laser Class (EN 60825-1)
1
Beam Divergence
< 2 mrad
Max. Ambient Light
5,000 Lux
Light Spot Diameter
see Table 1
Reflector required
no
Electrical Data
Port Type
100BASE-TX
PoE Class
1
Response Time
10 ms
Temperature Range
-25 ... 50 °C
Reverse Polarity Protection
yes
Interface
EtherCAT
Protection Class
III
Mechanical Data
Setting Method
Menu (OLED)
Housing Material
Plastic, ABSPlastic, PC
Optic Cover
Plastic, PMMA
Degree of Protection
IP68
Connection
M12 × 1; 8-pin, X-cod.
Weight
230 g
General Data
Web server
yes
EoE (Ethernet over EtherCAT)
yes
Output
EtherCAT
yes
External teach-in input
yes
Standards and certificates
Display brightness may decrease with age. This does not result in any impairment of the sensor function.
Table 1
Working Distance
0 m
10 m
Light Spot Diameter
5 mm
< 20 mm
Connection Diagram
Ctrl. Panel
60 = display20 = Enter key22 = Up key23 = Down key85 = Link/Act LED86 = STATUS78 = Module status
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Transmitter Diode2 = Receiver DiodeScrew M4 = 0.5 Nm
