The through-beam sensor works with a fine laser beam as well as a transmitter and a receiver. The collimated laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of just 1.0 millimeters. The transmitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
IO-Link 1.1
Very high switching frequency
Test input for high operational reliability
Optical Data
Range
10,000 mm
Smallest Recognizable Part
see Table 1
Switching Hysteresis
< 10 %
Light Source
Laser (red)
Service Life (T = +25 °C)
100,000 h
Laser Class (EN 60825-1)
1
Max. Ambient Light
10,000 Lux
Electrical Data
Sensor Type
Receiver
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 15 mA
Switching Frequency
4,500 Hz
Switching Frequency (interference-free mode)
2,000 Hz
Response Time
0.11 ms
Response time (interference-free mode)
0.25 ms
Temperature Drift (-10 °C < Tu < 40 °C)
10 % *
Temperature Range
-40 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Potentiometer
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M8 × 1; 3-pin
Optic Cover
Plastic, PMMA
Weight
6 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
1,945.13 a
Output
PNP NC
yes
IO-Link
yes
Adjustable parameters
Output
Push-pullNPNPNP
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching point
All other parameters can be found in the product documentation.
Standards and certificates
* See operating instructions for further information
Table 1
Distance transmitter/receiver
1 m
6 m
10 m
Smallest Recognizable Part
2,5 mm
1 mm
1,5 mm
Connection Diagram
Ctrl. Panel
05 = Switching Distance Adjuster30 = Switching Status/Contamination Warning68 = Power LED
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Receiver Diode2 = Alignment aid/Switching Status IndicatorScrew M3 = 0,5 Nm
