The reflex sensor with background suppression works with red light according to the angle measurement principle and is suitable for the detection of objects against any background. The sensor always has the same switching distance, regardless of the color, shape and surface of the objects. Minimal height differences can be detected with the sensors and, for example, various parts can be reliably differentiated from each other. The IO-Link interface can be used to configure reflex sensors (PNP/NPN, NC/NO, switching distance) and to output switching statuses and distance values.
Condition monitoring
Low switching distance deviation for black/white
IO-Link 1.1
Reliably detect objects against any background
Optical Data
Range
150 mm
Setting Range
30 ... 150 mm
Switching Hysteresis
< 10 %
Light Source
Red Light
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Light Spot Diameter
see Table 1
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 20 mA
Switching Frequency
1,000 Hz
Switching Frequency (interference-free mode)
500 Hz
Response time (interference-free mode)
1 ms
Response Time
0.5 ms
Temperature Drift
< 5 %
Temperature Range
-40 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Lockable
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Potentiometer
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M12 × 1; 4-pin
Cable length (L)
200 mm
Cable Jacket Material
Plastic, PUR
Optic Cover
Plastic, PMMA
Weight
20 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
1,718.95 a
Output
NPN NC, NPN NO
yes
IO-Link
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
inactiveError outputNCNC+NONO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching pointEmitted light
All other parameters can be found in the product documentation.
Standards and certificates
* Temperature range with permanently installed cable, bending radius: > 20 mm
