The reflex sensor with background suppression works with laser light according to the angle measurement principle and is designed to detect objects against any background. The sensor always has the same switching distance, regardless of the color, shape and surface of the objects. Thanks to the fine laser beam, even small parts can be reliably detected. The IO-Link interface can be used to configure reflex sensors (PNP/NPN, NC/NO) and to output switching statuses.
Condition monitoring
IO-Link 1.1
Increased switching distance
Laser class 1
Optical Data
Range
250 mm
Setting Range
60 ... 250 mm
Switching Hysteresis
< 15 %
Light Source
Laser (red)
Wavelength
680 nm
Service Life (T = +25 °C)
100,000 h
Laser Class (EN 60825-1)
1
Max. Ambient Light
10,000 Lux
Light Spot Diameter
see Table 1
Triple Dot Laser
yes
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 15 mA
Switching Frequency
250 Hz
Switching Frequency (interference-free mode)
150 Hz
Response time (interference-free mode)
6.7 ms
Response Time
4 ms
Temperature Drift
< 5 %
Temperature Range
-30 ... 45 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
50 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Lockable
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Potentiometer
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M8 × 1; 4-pin
Optic Cover
Plastic, PMMA
Weight
6 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
1,641.23 a
Output
PNP NC, PNP NO
yes
IO-Link
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NCNC+NONO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching pointEmitted light
All other parameters can be found in the product documentation.
