The retro-reflex sensor works with red light and a reflector. It also reliably detects objects with reflective or glossy surfaces at high speeds. Thanks to its great range, the sensor can, for example, be used to manage feed and presence controls as well as to detect objects on wide feed belts. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Also suitable for glossy and reflective objects
Condition monitoring
High switching frequency
IO-Link 1.1
Optical Data
Range
5,000 mm
Reference Reflector/Reflector Foil
RQ100BA
Smallest Recognizable Part
see Table 2
Switching Hysteresis
< 10 %
Light Source
Red Light
Polarization Filter
yes
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Light Spot Diameter
see Table 1
Two-Lens Optic
yes
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 20 mA
Switching Frequency
2,000 Hz
Switching frequency (speed mode)
3,500 Hz
Response Time
0.25 ms
Response time (speed mode)
0.14 ms
Temperature Drift
< 10 %
Temperature Range
-40 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Lockable
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Potentiometer
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M12 × 1; 4-pin
Cable length (L)
200 mm
Cable Jacket Material
Plastic, PUR
Optic Cover
Plastic, PMMA
Weight
20 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
2,808.97 a
Output
IO-Link
yes
NPN NC, NPN NO
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NCNOinactiveError outputNC+NO
Other parameters
Off-delayOn-delayMode of operationHysteresisEmitted lightSwitching point
All other parameters can be found in the product documentation.
Standards and certificates
Table 1
Working Distance
0,2 m
2 m
5 m
Light Spot Diameter
30 mm
180 mm
400 mm
Table 2
Distance, Sensor to Reflector
1 m
2,5 m
5 m
Smallest Recognizable Part
10 mm
20 mm
30 mm
Connection Diagram
Ctrl. Panel
05 = Switching Distance Adjuster30 = Switching Status/Contamination Warning68 = Power LED
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Transmitter Diode2 = Receiver DiodeScrew M3 = 0,5 Nm
