The reflex sensor makes use of a red light line in accordance with the energetic principle and is suitable for detecting objects without any background. It’s suitable for reliable detection of objects with stamped or perforated surfaces such as PCBs and perforated sheet metal. Furthermore, objects can be detected on the light line regardless of position. The IO-Link interface can be used to configure the reflex sensor (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and distance values.
Condition monitoring
Detection of objects with variable position
IO-Link 1.1
Red light line for perforated or stamped objects
Optical Data
Range
100 mm
Switching Hysteresis
< 10 %
Light Source
Red Light (Line)
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Light Spot Diameter
see Table 1
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 20 mA
Switching Frequency
500 Hz
Switching frequency (speed mode)
750 Hz
Response time (speed mode)
0.67 ms
Response Time
1 ms
Temperature Drift
< 5 %
Temperature Range
-40 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Lockable
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Potentiometer
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M8 × 1; 4-pin
Optic Cover
Plastic, PMMA
Weight
6 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
1,718.95 a
Output
NPN NO
yes
IO-Link
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NCNC/NONO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching pointEmitted light
All other parameters can be found in the product documentation.
Standards and certificates
Table 1
Detection Range
30 mm
65 mm
100 mm
Light Spot Diameter
10 x 35 mm
11 x 70 mm
12 x 100 mm
Connection Diagram
Ctrl. Panel
05 = Switching Distance Adjuster30 = Switching Status/Contamination Warning68 = Power LED
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Transmitter Diode2 = Receiver DiodeScrew M3 = 0,5 Nm
