The reflex sensor with background suppression works with laser light according to the angle measurement principle. It has a IO-Link interface with a data storage function as well as additional configuration and diagnostic options. The interface can also be used to configure the sensors (PNP/NPN, NC/NO, switching distance, error output), as well as for reading out switching statuses and distance values. The teach-in function also provides another configuration option. Two independent switching outputs can be used, for instance, to monitor minimum and maximum values of distances or fill levels and stack heights.
High-end
IO-Link 1.1
Data storage
Wireless settings via NFC
Teach-in
Two independent switching outputs
Optical Data
Range
300 mm
Setting Range
65 ... 300 mm
Switching Hysteresis
< 2 %
Light Source
Laser (red)
Wavelength
655 nm
Service Life (T = +25 °C)
100,000 h
Laser Class (EN 60825-1)
1
Max. Ambient Light
10,000 Lux
Light Spot Diameter
see Table 1
Electrical Data
Supply Voltage
15 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 15 mA
Switching Frequency
150 Hz
Switching Frequency (1 Switching Output)
800 Hz
Response Time
3.3 ms
Response time (1 switching output)
1.25 ms
Temperature Drift
< 3 %
Temperature Range
-25 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Interface
IO-Link V1.1
Data Storage
yes
Protection Class
III
Mechanical Data
Setting Method
Teach-in/NFC
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M12 × 1; 4-pin
Optic Cover
Plastic, PMMA
Weight
29 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
1,072.7 a
Output
NPN NO
yes
IO-Link
yes
NFC interface
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NCNONC/NO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching pointEmitted light
All other parameters can be found in the product documentation.
