The reflex sensor with background suppression works with laser light according to the angle measurement principle and is designed to detect objects against any background. The sensor always has the same switching distance, regardless of the color, shape and surface of the objects. Thanks to the fine laser beam, even small parts can be reliably detected. The IO-Link interface can be used to configure reflex sensors (PNP/NPN, NC/NO) and to output switching statuses.
Condition monitoring
IO-Link 1.1
Recognition of small parts
Laser class 1
Optical Data
Range
300 mm
Setting Range
65 ... 300 mm
Switching Hysteresis
< 1 %
Light Source
Laser (red)
Wavelength
655 nm
Service Life (T = +25 °C)
100,000 h
Laser Class (EN 60825-1)
1
Max. Ambient Light
10,000 Lux
Light Spot Diameter
see Table 1
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 15 mA
Switching Frequency
1,000 Hz
Switching Frequency (interference-free mode)
500 Hz
Response time (interference-free mode)
1 ms
Response Time
0.5 ms
Temperature Drift
< 2 %
Temperature Range
-25 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Single-turn
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M12 × 1; 4-pin
Optic Cover
Plastic, PMMA
Weight
30 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
2,096.76 a
Output
Contamination Output
yes
NPN NO
yes
IO-Link
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NOinactiveError outputNCNC+NO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching pointEmitted light
All other parameters can be found in the product documentation.
