The retro-reflex sensor for transparent objects works with red light and a reflector. Where conventional retro-reflex light barriers reach their limits, this retro-reflective barrier for clear glass recognition ensures that extremely shiny objects like glass, PET bottles, trays or film can be detected. Via the single-lens optic without blind spots, the sensor can detect objects even through small holes and gaps. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Condition monitoring
IO-Link 1.1
No blind spot from single-lens optics
Special for glass, PET and films
Optical Data
Range
2,600 mm
Reference Reflector/Reflector Foil
RQ100BA
Clear Glass Recognition
yes
Smallest Recognizable Part
see Table 2
Switching Hysteresis
< 5 %
Light Source
Red Light
Polarization Filter
yes
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Single-Lens Optic
yes
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 20 mA
Switching Frequency
2,000 Hz
Switching frequency (speed mode)
3,500 Hz
Response Time
0.25 ms
Response time (speed mode)
0.14 ms
Temperature Drift
< 3 %
Temperature Range
-40 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Potentiometer
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M12 × 1; 4-pin
Optic Cover
Plastic, PMMA
Weight
30 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
2,690.44 a
Output
IO-Link
yes
NPN NC, NPN NO
yes
Adjustable parameters
Output
Push-pullNPNContamination Output
Circuit
NCNONC/NO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching pointEmitted light
All other parameters can be found in the product documentation.
Standards and certificates
Table 1
Working Distance
0,5 m
1,3 m
2,6 m
Light Spot Diameter
30 mm
45 mm
80 mm
Table 2
Distance, Sensor to Reflector
0,5 m
1,3 m
2,6 m
Smallest Recognizable Part
1,5 mm
4 mm
15 mm
Connection Diagram
Ctrl. Panel
30 = Switching Status/Contamination Warning05 = Switching Distance Adjuster68 = Power LED
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Optical axisScrew M4 = 0.5 Nm
