The retro-reflex sensor for transparent objects, such as clear glass, works with red light and a reflector. It has a IO-Link interface with a data storage function as well as additional configuration and diagnostic options. The interface can also be used to configure the sensor settings (PNP/NPN, NC/NO, switching threshold, error output) as well as for reading out switching statuses and signal values. The dynamic readjustment of the switching threshold function automatically adjusts this for contamination, aging, or temperature deviations, meaning that these factors have almost no effect on functionality.
Dynamic readjustment of the switching threshold
High-end
Special for glass, PET and films
Wireless settings via NFC
Innovative display unit for alignment and diagnosis
Optical Data
Range
3,500 mm
Reference Reflector/Reflector Foil
RQ100BA
Clear Glass Recognition
yes
Smallest Recognizable Part
see Table 2
Switching Hysteresis
< 5 %
Light Source
Red Light
Polarization Filter
yes
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Light Spot Diameter
see Table 1
Single-Lens Optic
yes
Electrical Data
Supply Voltage
15 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 20 mA
Switching Frequency
1,000 Hz
Switching frequency (speed mode)
2,000 Hz
Response Time
0.5 ms
Response time (speed mode)
0.25 ms
Temperature Drift
< 3 %
Temperature Range
-40 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Lockable
yes
Teach Mode
NT, MT
Interface
IO-Link V1.1
Data Storage
yes
Protection Class
III
Mechanical Data
Setting Method
Teach-in/NFC
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M12 × 1; 4-pin
Optic Cover
Plastic, PMMA
Weight
27 g
Output
IO-Link
yes
NPN NO
yes
NFC interface
yes
Adjustable parameters
Circuit
NCNONC/NO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching pointEmitted light
All other parameters can be found in the product documentation.
