The retro-reflex sensor works with red light and a reflector. It also reliably detects objects with reflective or glossy surfaces at high speeds. Thanks to its great range, the sensor can, for example, be used to manage feed and presence controls as well as to detect objects on wide feed belts. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Also suitable for glossy and reflective objects
Condition monitoring
High switching frequency
IO-Link 1.1
No blind spot from single-lens optics
Optical Data
Range
7,000 mm
Reference Reflector/Reflector Foil
RQ100BA
Min. Distance to Reflector
0 mm
Smallest Recognizable Part
see Table 2
Switching Hysteresis
< 15 %
Light Source
Red Light
Polarization Filter
yes
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Light Spot Diameter
see Table 1
Single-Lens Optic
yes
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 20 mA
Switching Frequency
2,000 Hz
Switching frequency (speed mode)
3,500 Hz
Response Time
0.25 ms
Response time (speed mode)
0.14 ms
Temperature Drift
< 10 %
Temperature Range
-40 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Potentiometer
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M12 × 1; 4-pin
Optic Cover
Plastic, PMMA
Weight
30 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
2,690.44 a
Output
IO-Link
yes
NPN NC, NPN NO
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NCNC+NONO
Other parameters
Off-delayOn-delayMode of operationHysteresisEmitted light
All other parameters can be found in the product documentation.
Standards and certificates
Table 1
Working Distance
1,5 m
3,5 m
7 m
Light Spot Diameter
60 mm
120 mm
250 mm
Table 2
Distance, Sensor to Reflector
1,5 m
3,5 m
7 m
Smallest Recognizable Part
10 mm
6 mm
15 mm
Connection Diagram
Ctrl. Panel
30 = Switching Status/Contamination Warning05 = Switching Distance Adjuster68 = Power LED
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Optical axisScrew M4 = 0.5 Nm
