The reflex sensor with background suppression works with red light according to the angle measurement principle. It has a IO-Link interface with a data storage function as well as additional configuration and diagnostic options. The interface can also be used to configure the sensors (PNP/NPN, NC/NO, switching distance, error output), as well as for reading out switching statuses and distance values. The teach-in function also provides another configuration option. Two independent switching outputs can be used, for instance, to monitor minimum and maximum values of distances or fill levels and stack heights.
Data storage
Wireless settings via NFC
High-end
IO-Link 1.1
Teach-in
Two independent switching outputs
Optical Data
Range
500 mm
Setting Range
60 ... 500 mm
Switching Hysteresis
< 3 %
Light Source
Red Light
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Electrical Data
Supply Voltage
15 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 25 mA
Switching Frequency
150 Hz
Switching Frequency (1 Switching Output)
800 Hz
Response Time
3.3 ms
Response time (1 switching output)
1.25 ms
Temperature Drift
< 5 %
Temperature Range
-40 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Interface
IO-Link V1.1
Data Storage
yes
Protection Class
III
Mechanical Data
Setting Method
Teach-in/NFC
Housing Material
Plastic, ABS/PC
Degree of Protection
IP67IP68
Connection
M12 × 1; 4-pin
Optic Cover
Plastic, PMMA
Weight
33 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
886.3 a
Output
PNP NO
yes
IO-Link
yes
NFC interface
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NCNONC/NO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching pointEmitted light
All other parameters can be found in the product documentation.
