The sensors function in accordance with the principle of transit time measurement with laser class 1. The wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. The versions with a large light spot are suitable for reliably detecting objects with stamped, perforated or very uneven surfaces. The wintec also works very reliably in adverse ambient conditions, such as those caused by ambient light or dirt. Extensive condition monitoring functions additionally enable predictive maintenance and trouble-free operation.
2 mutually independent switching outputs
Wide working range and precise detection thanks to DS technology
No interactive influence
Intuitive operating concept
Large light spot
Optical Data
Working Range
0 ... 5,000 mm
Setting Range
50 ... 5,000 mm
Reproducibility maximum
3 mm*
Linearity Deviation
10 mm*
Switching Hysteresis
< 15 mm
Light Source
Laser (red)
Wavelength
660 nm
Service Life (T = +25 °C)
100,000 h
Laser Class (EN 60825-1)
1
Max. Ambient Light
100,000 Lux
Light Spot Diameter
see Table 1
Reflector required
no
Electrical Data
Supply Voltage
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 35 mA
Switching Frequency
50 Hz*
Switching Frequency (max.)
250 Hz*
Response Time
15 ms *
Response Time (min.)
4.7 ms *
Temperature Drift
< 0.4 mm/K
Temperature Range
-40 ... 50 °C
Number of Switching Outputs
2
Switching Output Voltage Drop
< 2.5 V
Switching Output/Switching Current
100 mA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Interface
IO-Link V1.1
IO-Link transmission speed
COM3
Protection Class
III
FDA Accession Number
2110079-001
Mechanical Data
Setting Method
Teach-In
Housing Material
Plastic, ABS
Optic Cover
Plastic, PMMA
Degree of Protection
IP67IP68
Connection
M12 × 1; 5-pin
Weight
41 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
547.59 a
Output
NPN NO
yes
IO-Link
yes
Adjustable parameters
Output
Error OutputPush-pullNPNPNPWarning output
Circuit
NCNC/NONC+NONO
Other parameters
Off-delayOn-delayFilterUnit of measureMeasuring modeEmitted lightSensor localizationKey illuminationTeach modeSensitivity
All other parameters can be found in the product documentation.
Standards and certificates
* Depends on mode, see table 2
Table 1
Working Distance
0 m
2 m
5 m
Light Spot Diameter
5 mm
30 mm
65 mm
Table 2
Connection Diagram
- = supply voltage 0 V+ = supply voltage +E/A1 = programmable input/output / IO-LinkE/A2 = programmable input/outputE3 = input
