The reflex sensor with background suppression works with red light according to the angle measurement principle and is suitable for the detection of objects against any background. The sensor always has the same switching distance, regardless of the color, shape and surface of the objects. Minimal height differences can be detected with the sensors and, for example, various parts can be reliably differentiated from each other. The IO-Link interface can be used to configure reflex sensors (PNP/NPN, NC/NO) and to output switching statuses.
Red light
Simple installation
Teach-in, external teach-in
IO-Link 1.1
Reliably detect objects against any background
Optical Data
Range
120 mm
Setting Range
35 ... 120 mm
Switching Hysteresis
< 5 %
Light Source
Red Light
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 35 mA
Switching Frequency
1,000 Hz
Switching Frequency (interference-free mode)
500 Hz
Response time (interference-free mode)
1 ms
Response Time
0.5 ms
Temperature Drift
< 5 %
Temperature Range
-25 ... 60 °C
Switching Output Voltage Drop
< 2 V
NPN Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Lockable
yes
Teach Mode
HT, VT
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Teach-In
Housing Material
Brass, nickel-platedPlastic, PBT
Full Encapsulation
yes
Degree of Protection
IP67IP68
Connection
M12 × 1; 4-pin
Weight
45 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
1,629.97 a
Output
NPN NO
yes
External teach-in input
yes
IO-Link
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NCNO
Other parameters
Off-delayOn-delayMode of operationSwitching pointEmitted lightTeach-in mode
All other parameters can be found in the product documentation.
