The retro-reflex sensor works with a fine laser beam and a reflector. The focused laser class 1 laser beam detects objects, e.g. during assembly, feed or presence checks, from 1 mm in size over the entire range. The IO-Link interface can be used to configure retro-reflex sensors (PNP/NPN, NC/NO, switching distance) and to output switching states and signal values.
Simple installation
IO-Link 1.1
Laser class 1
Teach-in, external teach-in
Optical Data
Range
12,000 mm
Reference Reflector/Reflector Foil
RQ100BA
Smallest Recognizable Part
see Table 2
Switching Hysteresis
< 5 %
Light Source
Laser focused (red)
Wavelength
655 nm
Polarization Filter
yes
Service Life (T = +25 °C)
100,000 h
Laser Class (EN 60825-1)
1
Max. Ambient Light
10,000 Lux
Light Spot Diameter
see Table 1
Single-Lens Optic
yes
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 40 mA
Switching Frequency
1,000 Hz
Switching frequency (speed mode)
2,000 Hz
Response Time
0.5 ms
Response time (speed mode)
0.25 ms
Temperature Drift
< 5 %
Temperature Range
-25 ... 60 °C
Switching Output Voltage Drop
< 2 V
NPN Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Lockable
yes
Teach Mode
NT, MT
Interface
IO-Link V1.1
Protection Class
III
FDA Accession Number
2411239-000
Mechanical Data
Setting Method
Teach-In
Housing Material
Plastic, PBTBrass, nickel-plated
Full Encapsulation
yes
Degree of Protection
IP67IP68
Connection
M12 × 1; 4-pin
Weight
27 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
2,817.28 a
Output
IO-Link
yes
NPN NC
yes
External teach-in input
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NCNO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching pointEmitted lightTeach-in mode
All other parameters can be found in the product documentation.
Standards and certificates
Table 1
Working Distance
1,2 m
6 m
12 m
Light Spot Diameter
10 mm
60 mm
70 mm
Table 2
Distance, Sensor to Reflector
1,2 m
6 m
12 m
Smallest Recognizable Part
1 mm
2 mm
2 mm
Connection Diagram
Ctrl. Panel
30 = Switching Status/Contamination Warning06 = Teach Button68 = Power LED
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")Screw M4 = 0.5 NmWrench Size
