The through-beam sensor works with red light as well as a transmitter and a receiver. Thanks to their high light intensity, the sensor provides a high degree of operational reliability even with interferences like steam, fog or dust. The transmitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values. The robust V4A (1.4404/316L) stainless steel housing is resistant to oils and coolants, as well as cleaning agent.
Condition monitoring
High light intensity with large switching reserve
Test input for high operational reliability
Robust stainless steel housing with IP69K
Optical Data
Range
6,000 mm
Smallest Recognizable Part
see Table 1
Switching Hysteresis
< 10 %
Light Source
Red Light
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Electrical Data
Sensor Type
Receiver
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 20 mA
Switching Frequency
1,000 Hz
Switching Frequency (interference-free mode)
500 Hz
Response Time
0.5 ms
Response time (interference-free mode)
1 ms
Temperature Drift
< 10 %
Temperature Range
-40 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Lockable
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Potentiometer
Housing Material
Stainless steel, V4A (1.4404 / 316L)
Degree of Protection
IP67IP69K
Connection
M8 × 1; 3-pin
Optic Cover
Plastic, PMMA
Ecolab
yes
Weight
42 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
2,074.4 a
Output
PNP NC
yes
IO-Link
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
NCNC/NONO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching point
All other parameters can be found in the product documentation.
Standards and certificates
Table 1
Distance transmitter/receiver
1 m
2 m
6 m
Smallest Recognizable Part
4 mm
1 mm
1 mm
Connection Diagram
Ctrl. Panel
05 = Switching Distance Adjuster30 = Switching Status/Contamination Warning68 = Power LED
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Receiver Diode2 = Alignment aid/Switching Status IndicatorScrew M3 = 0,5 NmM8 × 1 plug without snap lock
