The through-beam sensor works with a fine laser beam as well as an emitter and receiver. The collimated class 1 laser beam detects objects, e.g., when conducting installation, feed, or presence checks, starting from a size of 1.0 mm, over the entire range. The emitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as well as to read out switching statuses and signal values. The robust 316L stainless steel housing (1.4404/V4A) is resistant to oils, coolants, and cleaning agents.
IO-Link 1.1
Very high switching frequency
Test input for high operational reliability
Robust stainless steel housing with IP69K
Detect extremely small parts starting at 1 mm
Optical Data
Range
10,000 mm
Smallest Recognizable Part
see Table 1
Switching Hysteresis
< 10 %
Light Source
Laser (red)
Service Life (T = +25 °C)
100,000 h
Laser Class (EN 60825-1)
1
Max. Ambient Light
10,000 Lux
Electrical Data
Sensor Type
Receiver
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 15 mA
Switching Frequency
4,500 Hz
Switching Frequency (interference-free mode)
2,000 Hz
Response Time
0.11 ms
Response time (interference-free mode)
0.25 ms
Temperature Drift (-10 °C < Tu < 40 °C)
10 % *
Temperature Range
-40 ... 50 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Potentiometer
Housing Material
Stainless steel, V4A (1.4404 / 316L)
Degree of Protection
IP68IP69K
Connection
M8 × 1; 3-pin
Optic Cover
Plastic, PMMA
Ecolab
yes
Weight
42 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
1,913.81 a
Output
PNP NC
yes
IO-Link
yes
Adjustable parameters
Output
Push-pullNPNPNP
All other parameters can be found in the product documentation.
Standards and certificates
* See operating instructions for further information
Table 1
Distance transmitter/receiver
1 m
6 m
10 m
Smallest Recognizable Part
2,5 mm
1,0 mm
1,5 mm
Connection Diagram
Ctrl. Panel
05 = Switching Distance Adjuster30 = Switching Status/Contamination Warning68 = Power LED
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Receiver Diode2 = Alignment aid/Switching Status IndicatorScrew M3 = 0,5 NmM8 × 1 plug without snap lock
