The reflex sensor works with red light according to the principle of energy and is designed to detect objects without a background. The switching distance is set for a given object. Note that: Bright objects reflect transmitted light better than dark objects. Dark (matte) objects can also be differentiated from bright (glossy) objects. This means that presence or stack height checks can be conducted or counting tasks carried out. The IO-Link interface can be used to configure reflex sensors (PNP/NPN, NC/NO, switching distance), as well as to output switching statuses and distance values. The robust V4A (1.4404/316L) stainless steel housing is resistant to oils and coolants, as well as cleaning agent.
Condition monitoring
Large detection range
High switching frequency
Robust stainless steel housing with IP69K
Optical Data
Range
700 mm
Switching Hysteresis
< 10 %
Light Source
Red Light
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Electrical Data
Supply Voltage
10 ... 30 V DC
Supply Voltage with IO-Link
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 20 mA
Switching Frequency
500 Hz
Switching frequency (speed mode)
1,000 Hz
Response Time
1 ms
Response time (speed mode)
0.5 ms
Temperature Drift
< 10 %
Temperature Range
-40 ... 60 °C
Switching Output Voltage Drop
< 2 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Lockable
yes
Interface
IO-Link V1.1
Protection Class
III
Mechanical Data
Setting Method
Potentiometer
Housing Material
Stainless steel, V4A (1.4404 / 316L)
Degree of Protection
IP68IP69K
Connection
M8 × 1; 4-pin
Optic Cover
Plastic, PMMA
Ecolab
yes
Weight
42 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
2,584.53 a
Output
IO-Link
yes
PNP NC, PNP NO
yes
Adjustable parameters
Output
Push-pullNPNPNP
Circuit
inactiveError outputNCNC+NONO
Other parameters
Off-delayOn-delayMode of operationHysteresisSwitching pointEmitted light
All other parameters can be found in the product documentation.
Standards and certificates
Table 1
Detection Range
100 mm
300 mm
700 mm
Light Spot Diameter
20 mm
40 mm
80 mm
Connection Diagram
Ctrl. Panel
30 = Switching Status/Contamination Warning05 = Switching Distance Adjuster68 = Power LED
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Transmitter Diode2 = Receiver DiodeScrew M3 = 0,5 NmM8 × 1 plug without snap lock
