Pick-to-light light curtains work according to the retro-reflex principle. The required reflector is already mounted on the rear of the housing and serves as a reflective surface for the adjacent light curtain, which simplifies installation. The arrow-shaped, two-tone illuminated or flashing job indication points in the direction of the respective compartment from which the part is to be removed. It signals both correct and incorrect part removal.
Error prevention during partial picking processes in shelves and storage locations
Low mounting thanks to integrated reflector
Rugged aluminium housing
Directional, two-tone job indication
Optical Data
Range
2,000 mm
Min. Distance to Reflector
100 mm
Measurement Field Height (MFH)
420 mm
Beam Distance
30 mm
Switching Hysteresis
< 15 %
Light Source
Red Light
Polarization Filter
yes
Service Life (T = +25 °C)
100,000 h
Max. Ambient Light
10,000 Lux
Opening Angle
2.5 °
Two-Lens Optic
yes
Electrical Data
Supply Voltage
10 ... 30 V DC
Current Consumption (Ub = 24 V)
< 80 mA
Switching Frequency
40 Hz
Response Time
12 ms
Temperature Drift
< 10 %
Temperature Range
-25 ... 60 °C
Switching Output Voltage Drop
< 2.5 V
PNP Switching Output/Switching Current
200 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Protection Class
III
Mechanical Data
Setting Method
Teach-In
Display
Illuminated arrow
Housing Material
Aluminum, powder-coatedPlastic, PA
Optic Cover
Plastic, PMMA
Degree of Protection
IP65
Connection
M12 × 1; 4-pin
Cable length (L)
250 mm
Housing Length (L)
546 mm
Reflector Length (RL)
486 mm
Weight
270 g
Output
PNP NO/NC switchable
yes
Adjustable parameters
Circuit
NCNC/NONO
All other parameters can be found in the product documentation.
Standards and certificates
Connection Diagram
Ctrl. Panel
06 = Teach Button68 = Power LED01 = Switching Status Indicator
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Transmitter Diode2 = Receiver Diode3 = Job Indication
