These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object. Using a suitable reflector at the object, a highly accurate position measurement at large distances is also possible.
The configurations are selected using a menu and can be protected by a password.
Emitted light disengageable
Graphical display for easy operation
Temperature drift eliminable
Switching output A1 as analog output switchable (0...10 V/4...20 mA)
Optical Data
Working Range
100 ... 10,200 mm
Analog Working Range
200 ... 10,200 mm
Measuring Range
10,000 mm
Reference Reflector/Reflector Foil
RF508
Resolution
2 ... 6 mm
Linearity
0.5 %
Linearity Deviation
50 mm
Switching Hysteresis
3 ... 20 mm
Light Source
Laser (red)
Wavelength
660 nm
Service Life (T = +25 °C)
100,000 h
Laser Class (EN 60825-1)
1
Max. Ambient Light
10,000 Lux
Beam Divergence
< 2 mrad
Light Spot Diameter
see Table 1
Reflector required
yes
Electrical Data
Supply Voltage
18 ... 30 V DC
Current Consumption (Ub = 24 V)
< 100 mA
Switching Frequency
50 Hz
Measuring Rate
1 ... 100 /s
Response Time
10 ... 200 ms
On-/Off-Delay
0 ... 10,000 ms
Temperature Drift (-10 °C < Tu < 50 °C)
< 0.2 mm/K
Temperature Drift (Tu 50 °C)
< 0.4 mm/K
Temperature Range
-25 ... 60 °C
Number of Switching Outputs
2
Switching Output Voltage Drop
< 2.5 V
Switching Output/Switching Current
200 mA
Analog Output
0...10 V
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Protection Class
III
FDA Accession Number
0920382-000
Mechanical Data
Setting Method
Menu (OLED)
Housing Material
Plastic, ABSPlastic, PC
Optic Cover
Plastic, PMMA
Degree of Protection
IP68
Connection
M12 × 1; 4-pin
Functions
Off-DelayOn-Delay
Weight
84 g
Safety-relevant Data
MTTFd (EN ISO 13849-1)
346.68 a
Output
Error Output
yes
PNP NC
yes
Analog Output
yes
External teach-in input
yes
Adjustable parameters
Analog output
0...10 V4...20 mA
Output
Analog OutputError OutputPush-pullNPNPNP
All other parameters can be found in the product documentation.
Standards and certificates
Display brightness may decrease with age. This does not result in any impairment of the sensor function.
Table 1
Working Distance
0 m
10 m
Light Spot Diameter
5 mm
< 20 mm
Connection Diagram
Ctrl. Panel
21 = Mode Button60 = display
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")1 = Transmitter Diode2 = Receiver DiodeScrew M4 = 0.5 Nm
