A reflector must be used in combination with these sensors. wenglor has the right retro-reflex sensor for every application. Because of the M18 threaded connector, the sensor is easy to install and protected mechanically. A time delay can only be activated via the RS-232 interface.
Simple installation
Teach-in, external teach-in
Optical Data
Range
12,000 mm
Reference Reflector/Reflector Foil
RQ100BA
Switching Hysteresis
< 5 %
Light Source
Laser (red)
Wavelength
655 nm
Polarization Filter
yes
Service Life (T = +25 °C)
100,000 h
Laser Class (EN 60825-1)
2
Max. Ambient Light
10,000 Lux
Beam Divergence
5 mrad
Focus Distance
500 mm
Single-Lens Optic
yes
Electrical Data
Supply Voltage
10 ... 30 V DC
Current Consumption (Ub = 24 V)
< 40 mA
Switching Frequency
2 kHz
Response Time
250 µs
On-/Off-Delay (RS-232)
0 ... 5 s
Temperature Drift
< 5 %
Temperature Range
-10 ... 60 °C
Switching Output Voltage Drop
< 2.5 V
NPN Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 50 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Lockable
yes
Teach Mode
NT, MT
Protection Class
III
FDA Accession Number
0820374-000
Mechanical Data
Setting Method
Teach-In
Housing Material
Stainless steel, V2A (1.4305 / 303)Plastic, PBT
Full Encapsulation
yes
Degree of Protection
IP67
Connection
M12 × 1; 4-pin
Weight
27 g
Output
NPN NC
yes
External teach-in input
yes
RS-232 with Adapterbox
yes
Adjustable parameters
Circuit
NCNC/NONO
Other parameters
Off-delayOn-delay
All other parameters can be found in the product documentation.
